曾有人反饋過這樣一個問題，就是陶瓷加熱器加熱板上的助焊劑殘漬如何清理，也許大家都覺得這個是很難清洗掉的，然后就不管它了。確實，加熱板上的焊劑殘漬清理起來是比較困難，但是，也不要放任不管，因?yàn)榉胖脮r(shí)間太長，陶瓷加熱器的加熱板外觀會變得不美觀。
  現在就教大家正確清潔陶瓷加熱器加熱板上的助焊劑殘漬清潔方法：
  1、陶瓷加熱器加熱板上的助焊劑受到高溫作用，殘留物幾乎炭化，助焊劑會發生氧化作用，接觸助焊劑的加熱板會有變成黑色或黑黃色的，這是沒辦法用普通方法清洗掉的。
  2、首先用化學試劑(乙醇或甲基苯、二甲酮之類的)把助焊劑殘?jiān)逑锤蓛簦劣诩訜岚迳厦骖伾容^深的氧化層，可以使用5%-10%的稀鹽酸多擦拭幾次，就可以清洗干凈了，然后再用清水進行清洗。
  3、請注意必須穿戴好防護手套和防護眼鏡，以免出現閃失。
  以上是關于正確清潔陶瓷加熱器加熱板上的助焊劑殘漬清潔方法，希望對您有所幫助。陶瓷加熱器現在成為了一種高能熱分部均勻的加熱器、熱導性非常好的金屬合金，可以保證熱面溫度的均勻性，祛除設備熱點及冷點，應用范圍越來越普遍。

Someone once reported that how to clean the flux residue on the heating plate of the ceramic heater. Maybe everyone thought it was difficult to clean it, and then left it alone. It is true that it is difficult to clean the flux residue on the heating plate, but do not let it go, because the appearance of the heating plate of the ceramic heater will become ugly if it is placed for too long.
Now let's teach you how to properly clean the flux residue on the ceramic heater heating plate:
1.The flux on the heating plate of the ceramic heater is subject to high temperature, the residue is almost carbonized, the flux will be oxidized, and the heating plate contacting the flux will become black or black yellow, which can not be cleaned by ordinary methods.
2.First, use chemical reagents (ethanol or methyl benzene, dimethylketone, etc.) to clean the flux residue. As for the dark oxide layer on the heating plate, you can use 5% - 10% diluted hydrochloric acid to wipe it several times, and then clean it with clean water.
3.Please pay attention to wearing protective gloves and goggles to avoid accidents.
The above is about the correct cleaning method of flux residue on the ceramic heater heating plate. I hope it will be helpful to you. Ceramic heater has become a kind of heater with uniform high energy heat distribution and metal alloy with excellent thermal conductivity, which can ensure the uniformity of hot surface temperature and eliminate hot and cold spots of equipment. Its application scope is becoming more and more popular.